Publish Time: 2023-05-19 Origin: Site
Automatic pouring machine - Central type of the outlet of the pouring ladle
The pouring machine is suitable for pouring products such as gray iron, ductile iron, cast steel, etc. It is mainly used for molding lines and is widely used in fields such as hardware and automotive parts. It mainly consists of a transverse moving cart, front and rear small cars, lifting devices, tilting devices, and weighing devices, equipped with a personnel operation room.
What is "Outlet of pouring ladle" ?
It can be understood as the "pouring mouth". As shown in the figure below, the concept of the center type of the ladle nozzle is that the pouring nozzle is located at the center of the equipment.
Workflow:
Transporting molten iron supply to the pouring ladle → Pouring start → Continuous automatic pouring (automatically stopping pouring when the weight of molten iron in the ladle is less than the weight of a box of castings) → Returning to the origin to replenish the next package of molten iron → Pouring completion
In the molding line, the pouring machine can have three modes to cooperate with: synchronous pouring, fixed point pouring, and box tracking pouring function. Our pouring speed can reach a minimum flow rate of 2kg/s to 20kg/s, and the total weight of each mold can reach a minimum of 15kg-200kg. When our pouring machine is pouring the current box, the system will automatically calculate the angle at which the next box of pouring bags should tilt, making the pouring effect more accurate. At the same time, only one person is required to operate in the control room, reducing labor costs and improving safety.
Delin not only provides you with equipment, but also provides complete technical guidance, design solutions, and on-site personnel training to ensure orderly work and create benefits.